ENTTEC DMXIS - 512-Ch USB DMX Interface with quickshow ??

[b52productions]

looking for a different interface than the
ENTTEC DMX USB PRO

or maybe the newer model

DMX USB Pro MK2.

i currently use quickshow and plan to use ableton with dmxis, but plan to ugradeto beyond.

any suggestions

thanks

 

[Bob@Pangolin]

The DMXIS is not supported.
The DMX USB Pro can work for 1 universe after configuration that is.

 

[b52productions]

it has been discontinued to the newer mk2 as i have tried to order from you.. will this newer model work.

i switched to grandMa.2pc for dmx control, i have already orderd the edmx2pro for free universe using art-net

-- removed link --

 

[Bob@Pangolin]

The Enttec pro MK2 will work after reconfiguration with the tool available from the Enttec website.
You need to place it in serial mode. Then you can use 1 of the 2 DMX universes for QuickShow or BEYOND. DMX king never tested!!!

DMX king is not Enttec!

 

[b52productions]

understood. and thanks for the info.. i will end up with beyond and grandma2 someday but will have to piece quickshow in there for now somehow lol

 

[Bob@Pangolin]

If you upgrade to BEYOND, focus on art-net , especially in combination with GrandMa.
Check for an Enttec ODE or similar product.

 

[DAVIDE Effetto Lasershow]

Ciao
invece per me la centralina lo vede ma non dà segnale in uscita.
L'unità di controllo ENTTEC USB PRO funziona con quan

 

[DAVIDE Effetto Lasershow]

Hello
instead for me the control unit sees it but gives no signal segnale output.
ENTTEC USB PRO control unit works tương quan

 

[Bob@Pangolin]

Hello Davide, Is your problem resolved then?

 

[DAVIDE Effetto Lasershow]

no

 

[Bob@Pangolin]

Please contact us at support [at] pangolin [dot] com.