Alex Fischer
Member
I would like to use distributed scanning with 2 lasers with FB4. These lasers should run via Autoplay. A cue of several logos should run in an circle. laser Configuration is: Zone A with Laser A, distributed scanning enabled and Laser B added into distributed laser system.
Working in Beyond console, all Logos are fine, both lasers are working as expected in distributed mode.
So I made a FB Export, selecting the logos. In export wizard I choose Auto Play, select logos.
Next steps in wizard, I choose "Apply Color, Size Geometric correction and BAM" and "Content intended to be used on specific projectors. So I select the both projectors Laser A and Laser B and in the next window I select "Export to connected FB4" (both systems are connected. I choose a schedule number.
Files are transferred correctly; however, switching the system to Autoplay mode and selecting the cue number in FB4 settings leads to ... nothing. The logos are not displayed. What am I doing wrong?
Alex
Working in Beyond console, all Logos are fine, both lasers are working as expected in distributed mode.
So I made a FB Export, selecting the logos. In export wizard I choose Auto Play, select logos.
Next steps in wizard, I choose "Apply Color, Size Geometric correction and BAM" and "Content intended to be used on specific projectors. So I select the both projectors Laser A and Laser B and in the next window I select "Export to connected FB4" (both systems are connected. I choose a schedule number.
Files are transferred correctly; however, switching the system to Autoplay mode and selecting the cue number in FB4 settings leads to ... nothing. The logos are not displayed. What am I doing wrong?
Alex
