FB4/Beyond w/ SG300 Switches

G

Griffin Behm

New Member
Hello,

Running into some trouble establishing communication between a number of FB4s to Beyond over a switched network comprised of several switches with several VLANs.

The switching hardware in this case are a number of Cisco SG300 units connected via trunk links. Ports are configured to the appropriate VLANs, including the port for the FB4s, as well as Beyond.

All other traffic is passing correctly on the VLAN, however Beyond>FB4 communications are not.

FB4 and Beyond IPs:
192.168.22.181>185

Though it's a long shot, curious if anyone else has run into similar trouble while working with this or similar hardware configurations?

Thanks!
 
Update - finally had a chance to evaluate the network above personally. Had no issues establishing connection to several FB4s, whether running static IPs, dynamic IPs, or both simultaneously. Not sure what was going on back in June, but I don't believe the network infrastructure was the issue.

Thanks!
 
What were the VLan settings you used?

I opened a post to discuss the best settings of a VLAN for Beyond.
This theme is very interesting for me.
 
You must log in or register to reply here.
Back
Top