ILDA connection?

Discussion in 'LivePRO' started by elev8, Aug 24, 2009.

  1. elev8

    elev8 Member

    Hi guys,

    I have a DJ Traximus laser- 100mw green and it works fin on sound activation setting. However, when I plug in the ILDA connection via Live Pro it works for about 10-15 minutes then no beam and the red light starts flashing?

    Has anyone ever had suach an issue before? If so, any advice on recifying this will help.

    Thanks
    Aj.
     
  2. johnfl68

    johnfl68 Active Member

    Does the case of the unit feel warmer when it stops working, then it did when you first plugged in?

    Just a guess, as I am not familier with that unit, but sounds like the unit is overheating, and going into some sort of thermal shutdown.

    John
     
  3. Cyberb0b

    Cyberb0b Well-Known Member

    What is the scanrate of the laser?
    And did you ajusted livepro to that scan rate?

    I mean, are you overscanning your laser?
     
  4. elev8

    elev8 Member

    fixed

    Hi guys...issue was:

    the shutter controller transistor was short circuit. Replaced this and working fine now. :)%)
     

Share This Page