Interface v2

Discussion in 'Phoenix' started by Thomas Dittrich, Dec 4, 2017.

  1. Thomas Dittrich

    Thomas Dittrich New Member

    Hello
    following problem
    software windows7 ultimate 32 bit
    phoenix4 live 4.20
    Driver for micro 2interface installed
    firmwareupdate to 2.5
    hardwarecheck interface is detected unfortunately no connection to the laser
    the LEDs red lights green flickers at ilda issue get no output on the laser
    during upload (live mode) I can format the SD card. In livemodus is thus no Live output
    possibly is the interface locked, defective? its not registered yet, after softwareupdate is still waiting for code.

    Laser CS1000RGB 2013
     

Share This Page