Livepro and DMX

Discussion in 'LivePRO' started by Cyberb0b, Oct 31, 2009.

  1. Cyberb0b

    Cyberb0b Well-Known Member

    Hi,

    Cause we can't use dmx fully on livepro, i have tried another approach which can be handy.

    I have an Enttec DMX controller on my pc for my lightning, and livepro for the real stuf.

    What i did is install a Midi Loopback driver called Loopbe1 that i found Here and is free for non commercial use.

    In livepro i have changed the midi output to Loopbe1,
    In the free dmx software Freestyler, i have selected Loopbe1 as input for the commands.

    So i have control with my midi device and touchscreen as input and can control and overwrite my dmx zones.

    Maybe this info is useful for someone.
     
  2. Rendang1963

    Rendang1963 Member

    Loopbe1

    Thank´s a lot, that was exactly what I was looking for. I am using loopbe1 to synchronize Livepro shows and Realtime Video rendering (Ventuz) from my Midi Software Sequencer (Samplitude). All from one PC, works great.

    best reagrds,
    Martin Koslowski
     
  3. smokeAndMirrors

    smokeAndMirrors Well-Known Member

    Interesting... so you can trigger laser cues from Freestyler by sending MIDI messages to LivePro? Or the other way around?
     
  4. Pangolin

    Pangolin Staff Member

    Probably both!
     
  5. Alex

    Alex New Member

    LiveProDMX

    Or you could send DMX from Freestyler to LivePro, or from LivePro,
    DMX on/off values trough TTL chase settings, to Freestyler :)
     

Share This Page