Livepro DMX

Discussion in 'LivePRO' started by DZ, Apr 26, 2008.

  1. DZ

    DZ Member

    Ok, I am completely new to this Livepro program. I don't own it just yet, but I have been playing around with the demo. I've been trying to figure out if Livepro will be able to run a beam table I'm working on and from what I've discovered, it seems to lack one key feature. Here's what I would like to be able to do; I'd like to be able to assign one cue with a ttl chase that would go down the row of actuators for the different turrets, being able to set the brightness of the laser through DMX to say 100%. Then have and identical cue next to it with a brightness level at say 50%. I plan on using the DMX1602A which has an analog output that I figured would be great to vary the brightness of the laser, which will be solid state DPSS.

    Maybe I"m just missing something, I'm sure there is an easy solution, just can't figure it out with the demo! Any help would be greatly appreciated for this complete livepro noobie! :airtoss:

    Thanks,
    David
     
  2. LaserJ

    LaserJ Member

    Hey David,

    This can be done. If your still interested send me a pm and I'll explain..

    J
     
  3. Laseronics

    Laseronics Beta Tester

    J, do you know how to use a joystick to control a DMX controllable moving mirror? in LivePro
     

Share This Page