blaquenight
New Member
I can't get the 39 ch. fixture profile to operate as intended in MA3 - I have no Laser Output. Is there a wiki page or video for controlling the single fixture profile in MA3 (versus the old videos on MA2/using the setup/player dual fixture profiles)?
The Laser-Output LED indicator on the hardware does not light up, so I think this is user-error from the MA3 side. I just don't know what I'm doing wrong - Control>Setup Mode, Control>Test Frame 1, Dimmer>slowly increase. I've also tried activating several cues, still no output.
I have an external FB4-SE, firmware 0.08 build 1017. Content loaded via Quickshow, using sACN to MA3 onPC v. 2.0, Windows 11.
Thank you!
The Laser-Output LED indicator on the hardware does not light up, so I think this is user-error from the MA3 side. I just don't know what I'm doing wrong - Control>Setup Mode, Control>Test Frame 1, Dimmer>slowly increase. I've also tried activating several cues, still no output.
I have an external FB4-SE, firmware 0.08 build 1017. Content loaded via Quickshow, using sACN to MA3 onPC v. 2.0, Windows 11.
Thank you!