For Alexey

[aricha]

Hi Alexey

Can you do the following?

1 – Multi AV tracks to multi monitors
Load a video file to AV track 1 and send it to full size on monitor 2.
Load another video file to AV track 2 and send it to full size on monitor 3.

2 – How can I display a frame full power – no blanking.
Can I do it in live control? Can I do it in the frame editor?
Can I do it when I run a Timeline show?
I know that I will not have colors and no fades.
When projecting on a building or a mountain side it is all about power.


Thank you
Aricha

 

[Bob@Pangolin]

Hi Alexey

Can you do the following?

1 – Multi AV tracks to multi monitors
Load a video file to AV track 1 and send it to full size on monitor 2.

Yes you can by placing the video window on the second monitor.

Load another video file to AV track 2 and send it to full size on monitor 3.

BEYOND supports 1 video track.

2 – How can I display a frame full power – no blanking.

Open up the cue properties and change the output color balance.



Or in the frame editor.



Blanking is only available in projector settings and inside the frame editor.

Can I do it in live control?

No.

Can I do it in the frame editor?

As shown above.

Can I do it when I run a Timeline show?

Blanking No.

Per track you can set the color intensity on track properties, or prepare your frames as shown above.

 

[aricha]

The laser have modulation 0-5V for on & off and to control the intensity.
When you send a laser frame to the projector the laser is sometime on and some time off.

In frame editor you select point oriented freehand tool and you click the mouse once than you get a beam that is made out of 2 points.
But Beyond is adding 200 blank points, so the laser is off most of the time and when it is on to show these 2 points it doesn’t get to its peak power.

Can I cancel modulation/blanking from Beyond?
As if you apply a constant 5V to the modulation from another power supply or from a battery and Beyond is controlling only the scanners.

 

[aricha]

BEYOND supports 1 video track.

Beyond have unlimited video tracks but only 1 video window.

This is why it was address to Alexey, maybe he can make Beyond have unlimited video windows.

 

[ENOT]

Once time will allow, we will take a look at this.

What do you want to do? video walls? why one is not enough?

 

[aricha]

When I do a show with lasers and video and I have 2 video screen on 2 side o the stage I want different information on each video screen.
It is not that important for Beyond to have it since it is a laser software.
It can be nice if it is not to much of a trouble.

Thank you

 

[ENOT]

We are planing to work on this area, as well as support of multiple audio devices. However, both questions has mid/low priority relatively to other problems we have on table. The most possibly we will come to final decision after implementation and testing. What I want to say - yes, it is known question. At the same time, we must ensure that it will really work well before (rather than be sorry later). Thank you for understanding.