laser mapping?

Hola, te aconsejo que si quieres hacer un mapeo láser de vehículos o edificios trabajas con la versión Advanced o Ultimate, porque estas versiones vienen de manera estándar con el editor Universe que facilita la creación del mapeo láser. Con el universo, puede agregar fotos de vehículos o edificios para mapear sobre ellos.
Si tiene la versión esencial, le aconsejaría que trabaje en el software Realizzer, que puede agregar una foto del edificio o vehículo, o incluso el objeto en 3D para crear la asignación.
Agrego algunas muestras que hemos hecho en caso de que ayuden.
¡Un saludo!

Mapping on vehicle:
Mapeo en la construcción:
 
Hola, te aconsejo que si quieres hacer un mapeo láser de vehículos o edificios trabajas con la versión Advanced o Ultimate, porque estas versiones vienen de manera estándar con el editor Universe que facilita la creación del mapeo láser. Con el universo, puede agregar fotos de vehículos o edificios para mapear sobre ellos.
Si tiene la versión esencial, le aconsejaría que trabaje en el software Realizzer, que puede agregar una foto del edificio o vehículo, o incluso el objeto en 3D para crear la asignación.
Agrego algunas muestras que hemos hecho en caso de que ayuden.
¡Un saludo!

Mapping on vehicle:
Mapeo en la construcción:


Does this software directly integrate with beyond? In terms of the initial set up how do you map object and identify their zone. I cannot find a lot in the way of tutorials online. Any advice would help.

Thanks
 
I'm new to Q2 and Beyond.
How can laser mapping be done on Beyond?

Hello Minhky

Due to the absolute lack of information on how to go about starting video mapping, and after playing about with the software for a few hours. I think you'll find the 'Free Mesh Form' is the best way of identifying the true boundaries of what ever you are trying to map. You must have an active laser output then go to projection zones and click on geometric correction and then free form mesh. This will allow to you alter the points as you can see the output to align each object individually.

Hope this helps

Jake
 
Hola, si Realizzer está completamente integrado con Beyond, pero de acuerdo con la versión de Relizzer le permitirá ver más o menos números de láser.
Adjunté un enlace de instrucciones para configurar Beyond with Realizzer, si después de ver el video tienes alguna pregunta que puedas hacer y te ayudaré lo más posible.
 
Hola, te aconsejo que si quieres hacer un mapeo láser de vehículos o edificios trabajas con la versión Advanced o Ultimate, porque estas versiones vienen de manera estándar con el editor Universe que facilita la creación del mapeo láser. Con el universo, puede agregar fotos de vehículos o edificios para mapear sobre ellos.
Si tiene la versión esencial, le aconsejaría que trabaje en el software Realizzer, que puede agregar una foto del edificio o vehículo, o incluso el objeto en 3D para crear la asignación.
Agrego algunas muestras que hemos hecho en caso de que ayuden.
¡Un saludo!

Mapping on vehicle:
Mapeo en la construcción:
thank you very much
 
Does this software directly integrate with beyond? In terms of the initial set up how do you map object and identify their zone. I cannot find a lot in the way of tutorials online. Any advice would help.

Thanks
thank you very much. I think your way is very good.
 
[QUOTE = "LaserShow.es, bưu điện: 21.340, Thành viên: 11656"] Xin chào, tôi đề nghị rằng nếu bạn muốn thực hiện một phương tiện lập bản đồ tia laser hoặc các tòa nhà làm việc với các phiên bản nâng cao hoặc Ultimate, vì các phiên bản này có tiêu chuẩn với các biên tập viên Vũ trụ tạo điều kiện cho việc tạo lập bản đồ laser. Với vũ trụ, bạn có thể thêm ảnh của xe cộ hoặc tòa nhà để lập bản đồ cho chúng.
Nếu bạn có phiên bản cần thiết, chúng tôi khuyên làm việc trong phần mềm Realizzer, có thể thêm một bức ảnh của tòa nhà hay một chiếc xe, hoặc thậm chí đối tượng 3D để tạo ra sự phân công.
Tôi thêm một số mẫu mà chúng tôi đã thực hiện trong trường hợp họ giúp đỡ.
Chúc mừng!

Ánh xạ trên xe: [MEDIA = vimeo] 250846068 [/ MEDIA]

Lập bản đồ xây dựng: [MEDIA = vimeo] 242438663 [/ MEDIA] [/ QUOTE]
cảm ơn bạn rất nhiều vì đã chia sẻ. Tôi đã thấy nó.
 
Back
Top