2 scanner

Discussion in 'Lasershow Designer BEYOND' started by lasermachine, Jan 29, 2016.

  1. lasermachine

    lasermachine New Member

    Hello, associated with its use Beyond FB3, my problem is having another FB3 not associated with a software how can I use beyond with 2 scanners?
    Thank you
  2. ENOT

    ENOT Software Developer Staff Member

    BEYOND require license file and corresponding hardware (FB4, FB4, QM2000). You have it. Connect more controllers, it should work without any problems.

    Best Regards,
  3. lasermachine

    lasermachine New Member

    how do I get my license for 2 scanner and how much?
  4. whiteg

    whiteg Well-Known Member

    Check your Beyond:
    Click Beyond settings menü and click "Laser and emulaser controller Hardware" and add controller. (+)
  5. Bob@Pangolin

    Bob@Pangolin Staff Member

    Make sure both controllers are online, start BEYOND, and it will work.

    The only condition that your licensed controller to BEYOND is connected as well.
    No need for a secondary license if you have 2 controllers.
    Last edited by a moderator: Feb 2, 2016
  6. lasermachine

    lasermachine New Member

    Thanks for the help I'll try and I'll tell you