2x QM200.net

S

syncrosonix

New Member
Hello, I'm new here and I have a little problem at the beginning.

There are 2 QM2000.net that I will ply thru a network switch with a notebook.
I got a low price switch named Nexswitch SD050 from a friend but it is not working.
Every card works fine when it is single connected with the notebook.
But when a card is sticked thru the switch I don't get a link connection.
I have tried crossover and normal cables without succes.

Please tell me your experience with plying more than one QM's at one PC.
Maybe you can recommend a good working switch.

Oh, I'm from Germany so please excuse my bad English! %)

Thank you and Regards,
Sven
 
I would recommend you try a different switch (also known as a hub). This would allow you to find out if that is the problem.

In general, LD2000 needs a switch (or hub) to pass both TCP and USB broadcast messages. If your switch (or hub) does not pass UDP broadcast messages, then this would be a problem.

Best regards,

William Benner
 
You must log in or register to reply here.
Back
Top