CUE Window Grid Size

Discussion in 'Lasershow Designer BEYOND' started by TBX, Jan 15, 2016.

  1. TBX

    TBX Member

    Hello,

    is it possible to Change the Grid Size of the CUE Window. Normally it is 10 Wide and 6 High - i would like to set it more Wide and lower High so i can use the Quicktools Section to display the Beyond Universe in a normal Size.

    Is that possible? A variable Grid Size can be useful by different Midi Controllers with other Sizes as the Akai APC 40.

    Thank You.
     
  2. neutrino

    neutrino Well-Known Member

    You can change the size of the grid in the configuration box. I think it is:

    settings > configuration - grid size tab

    Cheers
    Rich
     
  3. TBX

    TBX Member

    I know, but only on Max Size 10 wide / 10 high and Min Size 4 wide / 4 high. I would like more wide then 10 and less high then 4.
     
  4. ENOT

    ENOT Software Developer Staff Member

    May I ask you why?
     
  5. TBX

    TBX Member

    Hello there,

    I use a 16: 9 Wide Touch Screen and have in the upper half the CUE Window and at the bottom the Quick FX / Beyond Universe.
    In this Division I give the CUE Window a lot of space left and right, and the Touch Fields are very small.

    Therefore a wider Arrangement would make sense.

    Thank you.
     
  6. ENOT

    ENOT Software Developer Staff Member

    Hi

    Please send me screenshot, a bit hard to visualize the problem.

    Best Regards,
    Alexey
     

Share This Page