pangoscript for fx flash button

Discussion in 'PangoScript, Universe and Midi Templates' started by Tom Laserverhuur.be, Nov 18, 2016.

  1. How do I use pangoscript so I can make a flash midi button of the FX slider in beyond.
    Have to bring the slider to 100% en then it should bring back to the value that the FX slider had at that moment.

    also for the same but for the fx speed

    thanks
     
  2. thank you

    I mean:
    I have the FX action fader and want to make a flash button that it just goes to 100% and thereafter returned to the value that the fader is on.
     
  3. Garrett_502

    Garrett_502 Well-Known Member

    You can make a button that will put the fx action fader to 100%, but i don't think there is a way to return to the previous value. I could be wrong though. That would be a nice feature
     
    Marnic and Tom Laserverhuur.be like this.
  4. Marnic

    Marnic Member

    I've another question but it's related to the question above, so I will ask it in this topic.
    When I will make a flashbutton for FX Action (for example fader 1) I use the pangoscript:
    Note on: SetFXAction 1, 100
    Note off: SetFXAction 1,0

    This works only in the first tab mode (Master mode) not in the second (Cue mode) or third (Zone mode).
    Is it possible to get it work in the "Zone mode"?
     
  5. Marnic

    Marnic Member

    Thanks Bob for your fast reply!

    This works!
     
  6. Paulo Cesar Saito

    Paulo Cesar Saito New Member

    I made that using these script in a midi controller fader to control fx action:
    GLOBALVAR fxa1
    fxa1 = ExtValue(0,100)
    SetFXAction 1, fxa1

    and this script in the midi flash button:
    ControlMaster
    var bool
    bool = ExtValue(0,1)
    if (bool=1) SetFXAction 1, 100
    if (bool=0) SetFXAction 1, fxa1

    The same is applied for a momentary stop in effect and animation speed :)
     
    Marnic likes this.
  7. The script for the fader don't work.

    Thanks already
     
  8. Paulo Cesar Saito

    Paulo Cesar Saito New Member

    You can't have the fader mapped to something, remove the midi mappings for the fx action or change to a unused fader
     
  9. 14874583297321722013596.jpg
     
    Last edited by a moderator: Feb 19, 2017
  10. Paulo Cesar Saito

    Paulo Cesar Saito New Member

    Maybe is the GLOBALVAR something new in beyond 3?

    That exact same code is working nice here in version 3.0 build 495, the one avaliable at pangolin website last week :)
     
  11. I try i't this week.
    I run on the 2.1
    To mutch bugs in the 3.0 in the begining.
    Thank you.
     

Share This Page