QM2000.NET tested and worked perfectly

Status
Not open for further replies.
Hi to all,

Recently just a few weeks ago we performed a large show in a soccer stadium in Romania for the Final Cup ( The big match of the year ) At the show we had 8 qmnets with accompying Lasers around the perimiter of the stadium with all the lasers facing inwards to the pitch. We ran indusrtial Sftp cable around the exterior of the field and placed a switch at each laser point. We basically had three main network directions Left run, right run and one high up above and behind the control area. these three networks all connected back to a central switch where we had the sound system and computer. This is a note to say well it worked perfectly without a single crash or failure. we had in Total 500 Meters of Network cable and 9 switches in all. The weather at the location was constantly changing from wind to rain to a nice warm day. Oh lasers we had 4 x 10watt 532nm 1 x 50wRGB, 3x25w RGB and what seamed like millions of smoke machines. Oh for the DMX we used wireless from wirelessdmx.com to 4 destinations and a small sgm pilot for smoke control. If anyone of you get to do such a large thing and need some advice just get in touch. Andy
 
Status
Not open for further replies.
Back
Top