Kvant Clubmax 3000

zerowaitstate

zerowaitstate

Well-Known Member
Kvant Clubmax 3000 scan speed 40 K ?

Hi all, i hope this finds you well.

After several years of 1 w Chinese knock offs, i have made the jump to some beautifully engineered KVANT units

I was lucky to pick up a couple of Clubmax 3000 rgb projectors at the recent LDI trade show.

The spec sheet reads 40 KPS at 8 degrees. (pangolin 506 scan set)

I am having issues in Beyond, Settings>projector setting>Scan Tab,
i dont seem to be able to set scan speed above 30000 pps

I need to put these babies to work and for that i need rock solid logos

All advice appreciated
 
Last edited:
Open up projector settings, go to tab "scan rate" and set the Maximum "range of sample rates accessible using effects" to the limit you want.
 
Last edited by a moderator:
i thought i was close but now my brain hurts, i was using
  • Step 1 The two sides we know are Opposite (300) and Adjacent (400).
  • Step 2 SOHCAHTOA tells us we must use Tangent.
  • Step 3 Calculate Opposite/Adjacent = 300/400 = 0.75
  • Step 4 Find the angle from your calculator using tan-1
Tan x° = opposite/adjacent = 300/400 = 0.75

tan-1 of 0.75 = 36.9° (correct to 1 decimal place)

my opposite is 260mm
my adjacent is 5216
=0.0498466
 
Fantastic !, i was trying to figure how i could work that into a excel sheet / calculator.

I was hopping to see you at LDI, but no luck. As ever a quick response with the info needed,
 
You must log in or register to reply here.
Back
Top