lasers on avolite

koutsoumpis

Well-Known Member
Hi guys.Any idea how can i control my lasers on a dmx console like avolite. i am using the classic tiger model. I see some people controlling lasers beams threw dmx consoles and looks great but as far as i know the build in shapes in the laser it self is very poor.Any ideas?
 
They probably use the new FB4 laser hardware controller. Its able to be controlled by dmx/art-net after you upload your own content to the sd-card on the laser.

There are DMX profiles available for many consoles. And basically.. It should be possible to use it on a dmx fader panel, however clumsy the controls on the dmx fader would be.

I think the fixture profile of the FB4 would explain a lot.

Screen Shot 2017-01-02 at 20.49.37.png
 
Thank you Bob.The channel assignment you sent me is for FB3 i guess correct?

We use the same dmx profile for all our products.. Meaning:

FB3 with Quickshow >> DMX in through enttec pro -> to control QuickShow. (PC needed to operate lasers)
FB4 DMX/Art-net profile for hardware controller (needs software to upload the content to the sd-card QuickShow comes with all our hardware.
BEYOND "simple" profile ,BEYOND actually has 3 different dmx fixture profiles, but 1 of them is this. (PC needed to operate lasers)
 
Back
Top