"ENTTEC USB PRO" PROBLEM

Discussion in 'Lasershow Designer QuickShow' started by DAVIDE Effetto Lasershow, Aug 7, 2020.

  1. DAVIDE Effetto Lasershow

    DAVIDE Effetto Lasershow Active Member

  2. Igor Strakhov

    Igor Strakhov Staff Member

    Please, check how EntTEC + Quick Show works with this device
     
  3. DAVIDE Effetto Lasershow

    DAVIDE Effetto Lasershow Active Member

    I do not understand
     
  4. Igor Strakhov

    Igor Strakhov Staff Member

    If you have any other DMX device (smoke machine, fan, light fixture, led tube), please check the operation of Enttec from Quick Show with this device (not with the one you checked earlier)
     
  5. DAVIDE Effetto Lasershow

    DAVIDE Effetto Lasershow Active Member

    Hello
    now I get it
    the test I have already done
    with other devices but nothing
     
  6. DAVIDE Effetto Lasershow

    DAVIDE Effetto Lasershow Active Member

  7. Igor Strakhov

    Igor Strakhov Staff Member

    Hi, DAVIDE!
    There is an assumption that your computer has some problem with the device drivers.

    Please find a way to test Enntec on another computer.
    Just don't forget to install this driver http://www.ftdichip.com/Drivers/CDM/CDM20828_Setup.exe
    before connecting the Device.
     
  8. DAVIDE Effetto Lasershow

    DAVIDE Effetto Lasershow Active Member

    hello I just formatted the pc to change HDD to SSD so everything is new and despite everything it still does not work, he sees it but does not emit any output signal to the device.
    Now I'm really fed up throwing everything away.