Fb4 problem

K

kk593083

New Member
Hi
I just set up the laser projector and connect to my PC with cat5 cable.
In Beyond 4.0 FB4 setting up i can find my laser but only can control under test mode.
The laser bling yellow just like not connection and i also cant find out the fb4 in software.
I try to reboot all my system but still same problem.
May i know it there any setting i need to set? Now autoip and beyond/qs mode. Thanks!
ONoHB8y.jpg
c4Pj0Gd.jpg

SFClwr6.jpg
 
Hi, kk593083!
Your FB4 has an strange address 169.254. 246.91, which is connected to your network card 192.168.4.5.
Is there a device in your network that distributes addresses in the network?
Check the TCP/IPv4 protocol settings on your network card.
 
Hi!
I just check my tcp/ipv4. Before is fixed and now i set it as auto but the problem still same.
There is only direct connect between the laser and pc with a cat5 cable. Kindly find the below picture.
UDmpB8S.jpg
UDmpB8S.jpg
Nv95645.jpg
 
Hi, kk593083!
Your PC network card (169.254.43.245) and your FB4 (169.254.100.82) network card are still on different subnets.
This may be because your Windows does not automatically assign IP addresses for some reason.
You can try to set up the same network for your PC network card and FB4. For example, for PC 192.168.0.100 and for FB4 192.168.0.200.
 
Halo,
i received a new laser with fb4 and i have problems with network internet conection. Can someone give me i hint ? i use Beyond 5.1
0

Thanks a lot
 
Hallo,

I have a problem connecting to fb4 over lan cat5 cable. In FB4 Setting under tab generel information i see that the fb4 is connected, but it doesnt show up in the list.
I have tried nearly everything but no luck.
Static ip for: PC 192.168.1.10 255.255.255.0
Static ip for FB4 192.168.1.100 255.255.255.0 192.168.1.10

and i tried auto ip.

I have a win11 system and i dont use a router, connected directly to pc.

What im doing wrong??

The broken image from other post.
1.jpg
 
Hi Igor,
Thank you for anser. I try this allsow put fb4 in Auto ip mode but did not work. is there any other option in Beyond seting that i miss ?
Do i need cros ower cat5 cable ?
 
Ales Cobl said:
Hi Igor,
Thank you for anser. I try this allsow put fb4 in Auto ip mode but did not work. is there any other option in Beyond seting that i miss ?
Do i need cros ower cat5 cable ?
Click to expand...
 

Attachments

  • 20211119_161928.jpg
    20211119_161928.jpg
    206.5 KB · Views: 28
  • 20211119_162035.jpg
    20211119_162035.jpg
    231.9 KB · Views: 24
  • 20211119_162112.jpg
    20211119_162112.jpg
    218.4 KB · Views: 28
  • 20211119_16185411.jpg
    20211119_16185411.jpg
    285.9 KB · Views: 25
  • 20211119_16223911.jpg
    20211119_16223911.jpg
    353.3 KB · Views: 21
I think you have some kind of problem with the ethernet cable or ethernet connector on your computer.
Try to check with another cable or computer
 
i try another computer to ( 2 pieces ) allsow with windows 10 and i replaced 3 different cables. i try wirh quickshow alllsow. :(
 
Helov Igor
No, it works.:) Thanks for your engagement that was the problem. Ante called us and we solved the problem. Excellent support thank you Pangolin team !260628507_1344671229317323_2726883823181039357_n.jpg
 
You must log in or register to reply here.
Back
Top