Today I've been testing the beta version of QS 3.0.
I use an APC20 to control QS. Is it possible to simulate the APCmini through Bome's MIDI Translator so I can use all the functionalities?
For example, i convert the raw Midi message from the 1st button on the top like this:
Incoming APC20: MIDI 90 35 7F > Outgoing: MIDI 90 38 7F, to QS
Incoming APC20: MIDI 80 35 7F > Outgoing: MIDI 80 38 7F, to QS
Incoming QS : MIDI 90 38 pp > Outgoing: MIDI 90 35 pp, to APC20
(The first button of the APC20 send normally Note On message 90 35 7F and the APCmini 90 38 7F)
Is this the right way?
If yes, i can't see the sliders on the screen as in the demonstration video https://www.youtube.com/watch?v=E6FWNyzFVBU&feature=youtu.be
Slider 1 send message B0 30 PP (00 >7F), Slider 2: B0 31 PP, . . . . . . . Slider 9: B0 38 PP
I learned all the sliders with Midi Live Control Setup.
---------------------------------
How can i activate the QuickFX as in that demonstration movie?
The APCmini send message 90 62 7F when the square shift button is pressed. When i send this message with Bome's Midi Translator then nothing happens.
---------------------------------
When i activate a cue with the mouse button QS send Velocity 04 (blinking red), and after stopping the cue 06 (blinking yellow).
But when i activate the cue with a Note-on midi message QS send Velocity 03 (red), and after stopping with a Note-off message 05 (yellow).
should that be so?
---------------------------------
Lots of questions, hopefully they can be answered ;-)
thanks in advance,
Peter
I use an APC20 to control QS. Is it possible to simulate the APCmini through Bome's MIDI Translator so I can use all the functionalities?
For example, i convert the raw Midi message from the 1st button on the top like this:
Incoming APC20: MIDI 90 35 7F > Outgoing: MIDI 90 38 7F, to QS
Incoming APC20: MIDI 80 35 7F > Outgoing: MIDI 80 38 7F, to QS
Incoming QS : MIDI 90 38 pp > Outgoing: MIDI 90 35 pp, to APC20
(The first button of the APC20 send normally Note On message 90 35 7F and the APCmini 90 38 7F)
Is this the right way?
If yes, i can't see the sliders on the screen as in the demonstration video https://www.youtube.com/watch?v=E6FWNyzFVBU&feature=youtu.be
Slider 1 send message B0 30 PP (00 >7F), Slider 2: B0 31 PP, . . . . . . . Slider 9: B0 38 PP
I learned all the sliders with Midi Live Control Setup.
---------------------------------
How can i activate the QuickFX as in that demonstration movie?
The APCmini send message 90 62 7F when the square shift button is pressed. When i send this message with Bome's Midi Translator then nothing happens.
---------------------------------
When i activate a cue with the mouse button QS send Velocity 04 (blinking red), and after stopping the cue 06 (blinking yellow).
But when i activate the cue with a Note-on midi message QS send Velocity 03 (red), and after stopping with a Note-off message 05 (yellow).
should that be so?
---------------------------------
Lots of questions, hopefully they can be answered ;-)
thanks in advance,
Peter
Last edited: