I currently use a single FB3 with two small projectors (X-inverted) and sync the cues to music using Denon DJ Prime hardware -> SoundSwitch -> (via DMX) -> Enttec DMX USB Pro -> QuickShow which works great!
Now I want to add a bigger centerpiece projector (Kvant 3400 FB4) and run simultaneous but different cues for the FB3 projectors and the FB4 projector. From what I have read in this forum and according to my own experiments I can not really trigger multiple cues from DMX in QS (though I might in Beyond using the DMX server?). So my idea for a QS workaround is this:
As a last resort I guess I could trigger the cues for the FB3 in QS (via Enttec) and the cues for the FB4 directly via DMX in to the FB4. But it seems to me that one might have better/simpler overall control if everything was triggered from the QS software.
Thanks!
Now I want to add a bigger centerpiece projector (Kvant 3400 FB4) and run simultaneous but different cues for the FB3 projectors and the FB4 projector. From what I have read in this forum and according to my own experiments I can not really trigger multiple cues from DMX in QS (though I might in Beyond using the DMX server?). So my idea for a QS workaround is this:
- Use the Quick Capture tool to capture dual-cues where each cue is individually set to FB3 and FB4 respectively using the zone feature and build a page in QS with these dual-cues.
- Trigger these cues from SoundSwitch through DMX in.
As a last resort I guess I could trigger the cues for the FB3 in QS (via Enttec) and the cues for the FB4 directly via DMX in to the FB4. But it seems to me that one might have better/simpler overall control if everything was triggered from the QS software.
Thanks!