meeble
Well-Known Member
Hi,
I'm currently using BEYOND: Build 557, and the latest 3.1 APC40 template.
1. Currently, when I hit any of the "Toggle Zone Output" buttons, they toggle on and off, which is fine in some cases. What if I wanted to set up the APC40 so that whenever I hit a zone button, all other buttons are auto toggled off and only that zone is toggled on. Is this easily possible? What I want to be able to to do is on the down beat, trigger a cue on Zone 1, then an 8th note later trigger the same cue to Zone 2. As it is now, I have to hit each zone 1, trigger the cue, hit zone 1 again to deselect, then click zone 2, trigger the cue, then hit zone 2 again to deselect.
2. Let's say I wanted to have a single button do the following: (A) Select Zone 1, trigger cue 1, which is a rhythmic one off cue, (B) Deselect Zone 1, (C) wait 1/8 note, (D) select Zone 2, (E) Trigger cue 1, (F) Deselect Zone 2.
The idea is being a rhythmic trigger delay of sorts. Can someone get me started with some pangoscript for that behavior?
3. While working on this, I discovered that if you have a specific Cue running on Zone 1, and then Toggle or Restart that same cue on Zone 2, nothing happens on Zone 2, but rather the cue on Zone 1 is toggled or restarted. Is there some way around this? Otherwise, if I want to the same cue at different times to different zones, it seems I have to make multiple copies of the same cue?
4. This is minor, but for some reason, when I select any of zones 1-3, the corresponding buttons light up correctly on the APC40, but when zone 4 is selected, it doesn't ever light up. Strange.
5. When editing the APC40 settings, I see a section called "MIDI Surface - Secondary Grid". How do I access this on the APC40?
6. Is there any way to use the APC40's "SHIFT" mode with BEYOND?
7. Is there any kind of full PangoScript documentation/tutorials available or in the works?
Thanks,
Devin
I'm currently using BEYOND: Build 557, and the latest 3.1 APC40 template.
1. Currently, when I hit any of the "Toggle Zone Output" buttons, they toggle on and off, which is fine in some cases. What if I wanted to set up the APC40 so that whenever I hit a zone button, all other buttons are auto toggled off and only that zone is toggled on. Is this easily possible? What I want to be able to to do is on the down beat, trigger a cue on Zone 1, then an 8th note later trigger the same cue to Zone 2. As it is now, I have to hit each zone 1, trigger the cue, hit zone 1 again to deselect, then click zone 2, trigger the cue, then hit zone 2 again to deselect.
2. Let's say I wanted to have a single button do the following: (A) Select Zone 1, trigger cue 1, which is a rhythmic one off cue, (B) Deselect Zone 1, (C) wait 1/8 note, (D) select Zone 2, (E) Trigger cue 1, (F) Deselect Zone 2.
The idea is being a rhythmic trigger delay of sorts. Can someone get me started with some pangoscript for that behavior?
3. While working on this, I discovered that if you have a specific Cue running on Zone 1, and then Toggle or Restart that same cue on Zone 2, nothing happens on Zone 2, but rather the cue on Zone 1 is toggled or restarted. Is there some way around this? Otherwise, if I want to the same cue at different times to different zones, it seems I have to make multiple copies of the same cue?
4. This is minor, but for some reason, when I select any of zones 1-3, the corresponding buttons light up correctly on the APC40, but when zone 4 is selected, it doesn't ever light up. Strange.
5. When editing the APC40 settings, I see a section called "MIDI Surface - Secondary Grid". How do I access this on the APC40?
6. Is there any way to use the APC40's "SHIFT" mode with BEYOND?
7. Is there any kind of full PangoScript documentation/tutorials available or in the works?
Thanks,
Devin
Last edited: