pangoscript

  1. Josephallen

    OSC to Pangoscript Value Range

    Hi there! Currently working on an OSC setup where the range from our midi sends 0.1-1 and is being sent to beyond to control the percentage value of faders. Currently we are only able to make it activate and go full 100% with no control of the range. Currently we have obs...
  2. Ninjan

    Creating a fixture - trigger PangoScript / Standard Value

    I've created a fixture within Beyond, sadly the default value is not being set upon loading the fixture if it's not 0 or 255 (that's possible). To do a workaround I tried to create a PangoScript however this one is not being executed automatically, although I tried with and without AutoStart or...
  3. Ninjan

    Toggle DMX on / off w. button

    How do I toggle a button to send e.g. value 255 if toggled else value will be 0? Basically on / off for DMX inside the Universe. By using buttons I only get value 1 yet cannot find where to change this? Thanks!
  4. CJDominey

    Releasing FX in BEYOND UNIVERSE

    Wondering if there is a way to create a release button which when triggered in Beyond Universe it toggles selected buttons in Beyond Universe off. Example: Strobe Effect and Colour Effect running with cue outputting. *trigger release* Strobe Effect and Colour Effect stop, but current cue...
  5. T

    Trigger button in Universe from Midi

    Hello all, I want to trigger some buttons in my Universe from my midi controller. I tried to do this by mapping a PangoScript to my midi button and adjusting the value of the Universe button from 0 to 1, only this does not seem to work. As in the following code: TestUniverse.Button.Value = 1 I...
  6. J

    Is there a way to midi map BPM dividers and multipliers with pango script

    Much like the way I set up my lighting punt page, I would love to be able to have a way to divide or multiply my tap tempo BPM using either a fader or a series of dedicated buttons when punting. This is probably a stretch, but If it was possible my preferred method would be a fader that divided...
  7. R

    Turn off Universe button(s) with Pangoscript

    Ex. I have a toggle button selected in my Universe. I want to toggle a second button that activates and turns off the first button. How would I do this using Pangoscript?
  8. M

    pangoscript settings menu?

    I don't see anything about using a command to open proejctor settings, or zone explorer Theres a sort of 'switching computers' macro I want to write so its easy to start with a popup (I got that) then open projector settings and load up my default settings on each projector by index. Then save...
  9. P

    Other options for creating dmx cues

    I've only found quick dmx as an option to create steps for a chase or cue. Is there another way to go about this process? Or I can create preprogrammed values for my colors in universe via pango script instead of having to use the sliders for every channel? So sort of a dmx step sequencer.
  10. M

    pango scripts mesh

    Curious how to use these? Any tutorials? guides? don't see anything written about them? Do they need to have some sort of point selection in the script before this in order to work? Command list has some mesh options: MeshCurve 1,2,3 // quad-spline between point 1,2 and 3 MeshPoint -100,-100...
  11. Garrett_502

    Help with pangoscript and universe

    I’m setting up a universe with custom buttons commands. firstly. I have a few buttons that I’m using to toggle cues in the workspace. The problem I’m having is that when i press a cue button I’ve made in the universe with the toggle cue pangoscript command, it stops all the other cues in the...
  12. L

    PangoScript running into the next day

    I am new to the Script side of Beyond and am trying to figure out if I can have a show run at a set time, then do it again the next day without having to come back and press play on the machine to do it again. This is what I have and it seems to work, but having to wait 24 hours to see if the...
  13. Garrett_502

    Change show bpm with pangoscript?

    I recently posted something on the facebook page about being able to change the bpm on the timeline in situations where I'm working with a long timeline with many songs, and many bpm changes. It was suggested that I use pangoscript to change the bpm. I was able to set a bpm change on a cue at...
  14. bnvisuals

    Midi to trigger one page only

    Hi, I'm trying to have a series of midinotes trigger one page of my setup only. On this page standard trigger-mode should be Flash. I think I managed to do this once before but have lost/forgotten the actual pangoscript. Can someone help?
  15. L

    Pangoscript Invert X sets value to 400

    Hi Guys, So I've been reading some threads about inverting zones through various methods, and I seem to remember Alexey posting that ZoneWhatever.SizeX= (-ZoneWhatever.SizeX) should accurately invert ZoneWhatever, right? Then this code should toggle it, shouldn't it? OnClick...
  16. J

    Crossfade Between Cues

    Hey Guys, I got a showfile with a bit of pangoscript to help control the different looks for the song. There are 3 cues that are played and I was wondering if there is a way so when I hit the pangoscript button to move to the next cue that it would cross fade to the next one instead of just...
  17. L

    Triggers not working?

    Hi All, I have been working on using triggers to help me with some DMX control structures I'm setting up, and some of them have worked great, but this one is puzzling me because I believe it should be working but nothing seems to be happening. I'm using DMX/Artnet to Pangoscript, For this...
  18. Garrett_502

    A few pangoscript questions..

    Is it possible to assign the transition duration to a specific time with pangoscript? I want to make midi buttons set specific transitions times like 1 sec, 2 sec, etc.. Can someone help me with the script for this if possible? Also, i would like to set a button to switch between the two...
  19. K

    Pangoscript FX Questions: StopFX & 1/4 Per Line / Drop

    Couple quick questions regarding pangoscript for some Quick FX related items. 1) How do you use "StopFX" properly? It is listed with parameters, but the example gives none: "StopFX // One or more layers. 0 stop. Effect 1..100" Putting parameters in makes the text red indicating an error...
  20. meeble

    NYE hours/minutes/seconds countdown

    Hi, Is there a way (using PangoScript perhaps?) to display a countdown to midnight using the system clock and showing hours, minutes and seconds? Thanks! meeble
Back
Top