beyond

A free Beyond OSC Template for the use with Open Stage Control. Download Open Stage Control (https://openstagecontrol.ammd.net/) Download the Beyond.json file (link below) Open the session file with Open Stage Control Control Beyond from any computer, tablet, phone in your network Download...

I am trying to map my launchpad mini mk3 to pangolin beyond, taking advantage of the full rgb LED FeedBack. I can set the midi not in the Fx grid section, but it does not respond to the corresponding LED FeedBack note. If I make a midi long pangoscript, it responds to the rgb color. How can I...

Instead of scripting the midi to pango, can I just make a template in universe to emulate the control surface, and just map directly into the universe for the midi outputs? I'm having trouble figuring that out.

I run Beyond Ultimate, latest version. I have noticed that most of the time the Transition feature doesn't work and instead just blacks out the cues for the duration set in the dynamics tab no matter the given length then the cue just pops on wherever it was supposed to be after the transition...

touchosc supports wired usb connections to mac and PC now. I'm trying to get it working in Beyond, but I'm having difficulty. I can see there is a usb connection with the touchosc bridge, and I can choose touchosc bridge in the midi devices, but I can't get any incoming midi in Beyond. It's...

Hi, Everything is working good until I play show and then beyond freeze and dongle start to flash red-yellow. It's working good on another cpu but this one is brand new and I can't solve the problem. I tried to install beyond again, update it but still the same problem. Any help? Thank you.

Hi Everyone! I have a question about Beyond - does the program support multi touch function ? I've found an information that 3.0 don't supported it, but how is in the 4.0 version ? I'm thinking about buying a touch screen and don't know if multi-touch is supported by Beyond. Thinking about -...

Hey everybody. Can anybody tell me, how to control a cue with the effect-speed-fader on the APC40? When I build my own cues I only can control with this fades if stop or go. But when I use some Beyond-cues I also can control the whole effect-speed. Thank you !

Hello all, I've run into a couple issues with the Beyond software; they don't seem to be related but if its not one, it's the other....anyway, so oftentimes when I start Beyond and enable laser output it will not scan. That is, it's just a stationary beam flashing colors. Seems to happen...

I'm wondering if anyone else is having trouble getting MIDI controllers to work correctly in Beyond. I have two off-the-shelf controllers, both connected to the computer via USB. Both devices are listed in MIDI Settings and both device profiles are loaded. Everything is set correctly; however...

Hi all, I've been learning Beyond and am specifically trying to learn more about the advanced frame editor to make frames and animations. A lot of it so far has been clicking buttons and figuring it out as I go, but I was wondering does anybody has any good tutorial links, threads, or other...

Hi guys, So I've hit a bit of a snag in Beyond. Previously with QS if i liked a standard cue that i had made with layering FX, i would drag the cue from the preview window to a new cue and it would copy the new cue and i could now use that. With Beyond, whenever i do this and try to play the...

Welcome all. I am trying to connect BEYOND and Realizzer. I follow the tutorial on the channel youtobe of Pangolin. It still does not active. You have unknown any error? only can help me. Thank many.

Help needed urgently! Anybody can guide me step by step for the network control from GrandMA to Beyond 3.0? Cant't seem to get the artnet connected and i'm using QM2000 as my master . and the rest of the projectors on fb4s. Thanks

Short introduction into OSC: The template used in the video above is attached to this thread. Additional hints & notes: - Sometimes TouchOSC will not find your machine. Go to the previous window and re-open "add template". - If nothing is found, you can try to set the destination network...

How does this feature actually work, and what does it do?

We are trying to send OSC commands via a VB control panel and have not been able to successfully execute any command that requires an argument. An example (attached screenshot 2) shows the successful exection of the following command: /beyond/master/blackout However, the following commands...

I am trying to output DMX via the Enttec DMXUSB Pro on beyond, Has anyone here achieved this yet and if so can you point me in the right direction. Thanks

i had bought the ultimate verson but my kinect is 2.0,not 1.8 if i click the kinect button in the beyond, it is inactive but i can use the camera in other app i wanna know is there any other settings? or beyond cant match with 2.0 thanks guys!

Hi, I´m looking for a way to fade 8 zones up and down via MIDI. One fader for each zone. And also assign clips to zones, which I´ve heard is possible. Can´t start Beyond where I am now, don´t have the FB3 here. So I can´t just figure it out myself either :-/ Side note: Why does Beyond need my...