fb4

  1. V

    Easy and fast way to import/convert video files to FB4

    Hello, I am new in this. We have purchased 4FB in order sometimes to show our logo, on our office wall, or sometimes to show some short video. Our business field of focus has nothing to do with lasers, 3D etc.. So we do not want to spend a lot of time for content creation...
  2. R

    How can I send FB4 pangolin data wirelessly ?

    Hello. I am looking for a way to run my fb4 lasers wirelessly. is with possible? At the moment I run a RJ45 cable from the back of my laptop to each of the lasers in series but over the long distance this gets messy. How can I do it wirelessly ? I have pangolin beyond essentials. thanks ricky
  3. J

    Using the Burstberry Blinder

    So, I took the plunge and bought a laser. After much research on a good "entry" level laser that would be high quality and well rounded my finger landed on the Burstberry. I am very pleased with my purchase and have been tinkering around in Beyond. However I am curious about how to activate...
  4. M

    osc fb4 commands

    Does anyone know what the magic button does? I hope it gives the laser flavor or something. kvant_magic_button
  5. P

    Problems with 39ch DMX mode of FB4

    Hi, I am having no joy in getting the 39ch dmx mode to work on my two FB4's (in Tarm 2.5 lasers). The 16ch mode works, but I cannot get the 39ch mode to work at all. The red led does not light, in setup or run mode. I have tried both DMX and Artnet, and the devices have been set to the correct...
  6. nor

    Connectors FB4, bare-bones

    I want to build a custom thingy with FB4 inside, preferrably Artnet, DMX in/out, ILDA out. Can I just buy the simplest unit and use Molex on the connectors - without breakout boards and attachments?
  7. R

    DMX Madness

    I think I'm going crazy. I have this wonderful Laser, Quickshow, and an Entec DMXUSB Pro interface. All I want to do is to be able to select a cue and modulate some of the display parameters via DMX, I can't find any step by step guide to making this work! This wonderful and extremely...
  8. L

    FB4 Update Issue

    I am currently having an issue updating the FB4-SE cards in my lasers. I have updated to Beyond 4.0 from a fully operational Beyond 3.0, and have performed the following attempts of updating: I plugged in the entire system via RJ45 Cat 5e into the gigabit network switch, opened Beyond 4.0, the...
  9. O

    FB4 network adapter unavailable. How to check network settings and connections?

    How to connect FB4 to my laptop
  10. D

    FB4 enlosure or FB4 housing can use in Beyond 4.0

    Hi Pangolin I'm Daniel, I have FB3 with beyond advance license, now I want to by FB4 enlosure or FB4 housing( no license), so it can be use with FB3 with beyond advance license! tks sorry with my english best gigar
  11. S

    BAM issues on FB4

    Hi guys I am having a bit of trouble with BAMs when i upload content to FB4 from beyond or QS. It seems as if the BAM is scaled and moved along with the content when i subsequently control the FB4 by dmx, which i cant find any reason why you would want to have happening.. How do i setup a BAM...
  12. Garrett_502

    Problems with Autoplay list on fb4

    I'm trying to figure out the list autoplay function on the fb4 to play a set of cues sequentially in a loop. It seems pretty straight forward, but for some reason, it's just not doing it. I exported 4 cues in the autoplay list option and uploaded to the fb4. It plays the cues, but it doesn't...
  13. S

    FB4 shutter flicker

    Hi all, I have two lw Tarm RGB 3500 lasers connected via ILDA to an FB4 unit taking an Art-Net input from a Chamsys console. The Chamsys console simply triggers different pages and cues from the FB4's SD card, which always worked fine till recently. However, recently the safety...
  14. Garrett_502

    Timecode on FB4

    How does this feature actually work, and what does it do?
  15. lasershow-creation

    connector type on FB4 --> by pass front rj45 connector

    HI guys, since I am going to arrange three of my FB4 into a new 19" housing, I would like to by pass the the front RJ45 connector and use an Ethernet hub inside the 19" rack. As I´ve seen inside the normal external housings for FB4, this is already done (front connector is blocked by plug), but...
  16. P

    Graphics Control Issues with QS3 and ClubMAX 800

    Greetings, I have a ClubMAX 800 projector connected to a Pangolin FB4-SE through a ILDA cable. The FB4 is then connected to a laptop running QuickShow 3.0 through an Ethernet connection. I am very new at this laser show industry. I set up the system based on the manual and program the software...
  17. Garrett_502

    Multi-Zone, multi-projector shows with FB4 autoplay?

    I've been lead to believe that mutli-projector, and multi-zone shows can be played back from projectors that are each equipped with FB4's on the same network. Is this true? I can't seem to find any documentation, or even anyone discussing this. I want to know if I can trigger a show via dmx...
  18. W

    FB4 ArtNet Mode

    Hello Team, I have a CM6000FB4, and I have uploaded one test cue to Page1 Cue1, however I can't seem to trigger it in ArtNet Mode. It shows as 32..35 when I upload, but when I put ArtNet Universe0 Channel1 to 33, nothing happens. I know the Network Settings are correct and ArtNet is being...
  19. Q

    fb-se ip adress

    hello i new user about quick show and fb4-se how i can make a network shared unit to see content of sd card into fb4 from my pc? i need to upload and copy from network shared. thanks
  20. D

    Exporting projections zones to SD card FB4

    How do I maintain projection zones associated with different tracks on a timeline in Beyond when exporting to fb4 sd card in stand alone? When I export my show to the sd card and the fb4 is set on auto play all of the geometric corrections from the different zones default to one of the...
Back
Top